Tel: +86 21 5109 7921,+86 21 5109 0930



What are the advantages of self-cleaning filters?

2021-05-08

Why do so many users choose self-cleaning filters? What are the advantages of this equipment?


Advantages of self-cleaning filters.

1、Self-cleaning filter is resistant to acidic, alkaline and other chemical solvents;

2、Self-cleaning filter has high compressive strength and high temperature resistance, and the filter core is not easily deformed;

3、Self-cleaning filter is of high quality and low price, high cost performance, low operation cost, easy to clean, and the filter can be replaced.

4、Self-cleaning filter system has high precision, and the pore size of the filter core is well-proportioned;

5、Self-cleaning filter system has small friction resistance, large circulation, strong dirt interception capacity and long service life;

6、The material of self-cleaning filter core is of high cleanliness grade, and there is no pollution to the medium of filter system;


Self-cleaning filter installation steps.

1、Clean the filter housing.

2, the net shell import and export and filtration system pipeline connected to the connection, pay attention to the direction to ensure that the cartridge for the outer side of the water, the inner side of the water out of the state.

3. Open the plastic bag at the open end of the cartridge and check whether the O-ring is intact and in place.

4、Wet the O-ring and cartridge holder socket with suitable wetting agent (e.g. water).

5. Hold the end of the cartridge near the O-ring by hand and insert the cartridge socket into the cartridge holder jack vertically completely.

6、After inserting all the cartridges, remove the cartridge bag, then snap on the pressure plate to fix it, and then install the metal cover shell.

7、Open the bleeder valve at the top of the housing

8, slightly open the inlet valve, so that the liquid into the shell, until the liquid from the top of the shell of the air release valve benefit, then close the air release valve.

9. Slowly adjust to open the downstream outlet valve until it is completely open.

10, slowly adjust to open the inlet valve until fully open at this time the pressure drop between the upper and lower reaches of the filter is 0.02Mpa (determine the initial pressure drop under the flow rate).


These are the advantages of self-cleaning filter and the installation steps, hope it can bring help to you.